Hello all,

I already introduced myself and my company in the wheel section, but wanted to post here as we have a 17 inch wheel specifically made for the Boxster spec series. We are a small company based in Spain making inroads into the US market. Currently we specialize in making wheels for F1 and DTM, but we are expanding into the street car wheel market, specializing in custom one off wheels.

Our wheels all start as forged blanks, and we do 2, and 3 piece as well as monoblock wheels. Naturally the finish is also custom as we don't finish the wheel until it is purchased. Here are a few examples of things we have done for customers, and a couple that we have build just one of to showcase but haven't made for anyone yet.

Here is the CAD picture of the wheel we have made specifiacally for the Boxster spec series. This wheel is a forged center and a standard BBS outer rim so in case of damage it can easily be changed. As I mentioned earlier the finish is custom made to the customers requirement, so pretty much any paint, anodize, or powder coat color is available.



Naturally since we make all our wheels we can design anything else you guys have in mind.

Manuel Scettri

 

Hello all,

I would like to clarify to avoid confusion that this particular model is not yet in production. If we receive an order of 5 sets or more we can put them in production. Time of completion from the word go is approximately 6 weeks.

Manuel Scettri

 

Manuel, do you have any specs on the wheels... Weight & estimated pricing?

Thanks!

 

The wheels actually come in under the weight limit as they are, which include small holes in the back between the lug nut holes. Machined this way they come in at 18.5 lbs. If we remove the lightening holes and machine less material out we can bring them right up to the 20 lb weight minimum required. The cost if we manufacture more than 6 sets would come in around 1100 each with finish of your choice.

Manuel Scettri

 

Thanks Manuel, and will you be making any 18" wheel setups?

 

Yes, we can and will be doing 18s. In this particular model we will only do 17s unless Boxster people ask us to specifically do 18s since its made for the spec series. We can do 3 piece wheels starting at 16, all the way to 22.

Manuel Scettri