Anyone have a Cargrapfic lowering Module ?
#3
04-14-2010 | 10:25 AM
Former Vendor
Joined: Mar 2009
Posts: 1,053
From: Costa Mesa, California
Rep Power: 0
RojoGTS:
The lowering can be adjusted for about 20mm+. The hole with 2 points is for adjusting both axis, the hole with 1 point is for adjusting the rear axis. Carefully turn with a small screw driver. One turn clockwise means 2mm lower. After adjusting, lift and lower the car with the car switch to realize the adjustment.
Feel free to contact us at 714.545.1046 for technical assistance, ask for Anthony - he will be happy to talk you through the procedures.
Bryan
The lowering can be adjusted for about 20mm+. The hole with 2 points is for adjusting both axis, the hole with 1 point is for adjusting the rear axis. Carefully turn with a small screw driver. One turn clockwise means 2mm lower. After adjusting, lift and lower the car with the car switch to realize the adjustment.
Feel free to contact us at 714.545.1046 for technical assistance, ask for Anthony - he will be happy to talk you through the procedures.
Bryan
Thread
Thread Starter
Forum
Replies
Last Post
adnanm3
Aston Martin
17
11-22-2023 02:43 AM
proTUNING Freaks
997 Turbo / GT2
17
09-15-2015 07:28 AM
