Clear Side Marker Installation
#16
guys, I made a mistake and bought the pre '08 side marker lamps for my '08 Cayenne. They are in their boxes, never opened, never used. I can sell them for 30bucks/set + shipping. I only have one set, please buy it from me otherwise they're going to trash..
#18
I started on one size just now and I understand what your saying with the top torx holding in the marker light!!! WOW... I couldn't get the top part of the WHEEL WELL OFF!!! WHICH NEEDS TO COME OFF WHICH IT DIDN'T SEEM TO BE STATED ANYWHERE ON EITHER OF THE FIRST TWO PAGES!!!
2005 Cayenne Turbo...SO FOR FUTURE REFERENCE TO ANYONE DOING THE MARKER LIGHTS..
make sure you take off the plastic wheel well (25 torx on all bolts) and then get in there and take off the top and bottom torx bolts holding in the light.(27 torx is the correct not 20 btw on that one!)
It is a pain on CTT about a 30min to hour job for sure, but on my CL mercedes takes less than 60 seconds...
2005 Cayenne Turbo...SO FOR FUTURE REFERENCE TO ANYONE DOING THE MARKER LIGHTS..
make sure you take off the plastic wheel well (25 torx on all bolts) and then get in there and take off the top and bottom torx bolts holding in the light.(27 torx is the correct not 20 btw on that one!)
It is a pain on CTT about a 30min to hour job for sure, but on my CL mercedes takes less than 60 seconds...
#22
+1 on the remove the bottom screw and break the onld unit out then wiggle the new one in. I can't see how you can get to the top screw without taking the front bumper off, especially on the passenger side.
Excellent post!!
Excellent post!!
Thread
Thread Starter
Forum
Replies
Last Post