And for the 9500Ci laser jamming unit's display, we made a very unique box to fit to the factory opening. We also designed to to be wrapped in matching leather and a hidden soft touch on / off switch, which does not come standard with this system

http://youtu.be/-ZrhnsMLH5c

 

One of the most commonly asked question is how well does Spectra PhotoSync compare with other window tint products. So we decided to actually put Spectra PhotoSync to test against a 5% metallic limo tint. Now keep in mind, the shades we used for comparison is PhotoSync65, 55, and 45, so much lighter compared to limo tint at 5%. There is also one major difference - the limo tint has metals in it so it can produce some decent heat rejection that would be comparable to a lighter ceramic based tint:

 

 

9500Ci laser jamming system installed with a customized box to integrate the rear jammer to the frame. Typical 9500ci rear laser jammer installation is placed directly onto the 2 bolts on the license plate frame, which leaves a very visible box in plain site. The way we do it comes out much cleaner and more OEM.



Spectra PhotoSync Nano Tint - blocks 98.5% of infrared! 75% on the windshield

 

Conducted another test since we have been receiving inquiries to test PhotoSync against ceramic

Test: PhotoSync vs. a leading ceramic tint at 40%

**on this R8, we had PhotoSync 75 installed to the windshield and 65 to the side glasses

 

What a stunning supercar from Audi! Full vehicle Satin Guard + Spectra PhotoSync Nano tint! - this car's done right!

 

 

To note, this video below shows how PhotoSync compares to a very popular ceramic 40% tint. However, this comparison was done at Spectra PhotoSync's pre-activation phase. In short, PhotoSync's Solar Adaptive Coating did not activate to produce maximum heat rejection, which means it will perform even better when exposed to solar energy for approximately 15 minutes.

 

 

Interior shots of the customized display for the radar detector / laser jammer:

 

Protect your paint and change the look - Satin Guard's your solution. Made by Prestige Film Technologies

 

another one that brings out the lines of this beautiful R8 GT Spyder. For more project vehicles with Satin Guard, just google "Satin Guard" and you will find scores of photos / projects we have done with this exceptional product.

Most importantly, Satin Guard is commonly mistaken for matte vinyl. Vinyl is typically 1.5-2.5 mils thick and is a colored product that does not have much protective capabilities. Satin Guard is approximately 3-4 times as thick and is a translucent product only. It comes with a coating that is anti-etch and anti-oil, so it is very easy to clean - just wash. Fingerprints hardly show even on darker colors. Equally important is that in lower lighting conditions, it will look matte. In direct sunlight, you will see satin metallic flakes

If you are outside of Northern California, please contact the manufacturer to see who in your area carries Satin Guard (prestige-films.com) or contact one of the great representatives with this company:

vtran@prestige-films.com or 408-657-3880

Check us out on our facebook! - http://www.facebook.com/premier.protective?ref=tn_tnmn

 

Absolutely Stunning Car!

 

Here's a photo of how nicely the rear laser jammer is integrated to the license plate:

Visit us on facebook for more cool project cars: https://www.facebook.com/premier.protective