Overstock.com garage tiles?
#1
Overstock.com garage tiles?
anybody tried them yet? they're pretty cheap compared to racedeck, etc... they don't appear to have any accessories like edge moldings, etc... though, so it may not look as professional when installed.
getting ready for a garage makeover.
getting ready for a garage makeover.
#2
same as race Deck just like Costco. All three are made by Snap Lock Industries then private labeled. Race Deck will tell you they are thinner it is BS the tread pattern and limited color selection is the only difference.
#3
did you use them in your garage?
were you able to get the trim pieces for the front and sides?
it's about 1/3 to 1/2 the price of other comparable tiles.
when i read some reviews on the overstock product, some people were dissapointed that it was just hard plastic. i've never seen any of these products in person. are the racedecks hard plastic too? i had the feeling some people were expecting them to be somewhat "rubbery".
were you able to get the trim pieces for the front and sides?
it's about 1/3 to 1/2 the price of other comparable tiles.
when i read some reviews on the overstock product, some people were dissapointed that it was just hard plastic. i've never seen any of these products in person. are the racedecks hard plastic too? i had the feeling some people were expecting them to be somewhat "rubbery".
#7
what did you pay per square foot for the costco stuff? any idea if sams's sells a similar product? are your costco tiles the coin pattern? i'm curious too about how roll-away products move over that surface.
the stuff on overstock is a smoking deal. i'd buy it today if i knew i could get the trim pieces for it, which they don't seem to list on the site. it's dirt cheap compared to the prices i've been quoted for racedeck.
sandoval: did you go right up to the edge of your walls, and if so, how hard was it to trim it?
the stuff on overstock is a smoking deal. i'd buy it today if i knew i could get the trim pieces for it, which they don't seem to list on the site. it's dirt cheap compared to the prices i've been quoted for racedeck.
sandoval: did you go right up to the edge of your walls, and if so, how hard was it to trim it?
Trending Topics
#9
I bought mine on sale at costco 1.80 sqft or so.
I cut the tiles with a fine tooth blade (Plywood/finidhing blade) on a table saw. Super easy to cut, like butter.
I cut them about a 1/4" from the all and then used the rubber wall base Similar to this http://www.griotsgarage.com/catalog....nown&SKU=92334 I used a tube adhesive and caulking gun.
My pattern is a diamond plate patter
Edge, I actually used the Race Deck Edge in Black I bought the individual peices at Griots garage. http://www.griotsgarage.com/search.jsp?searchtext=edge It works with the moto floor.
If you don't put the foam under the tiles they will make a loud clacking sound.I drove me nuts.
I have not had any problems using my floor jacks I have the Costco Alum Jack and HF Alum Jack both have worked fine no damage. If you plan on using jack stands get Jack stands with a flat plate. Griots used to make them but it looks like they are discontinued. I have a set and love them. Normal jack stands with angle iron will pierce the tiles.
Try these:
http://www.pelicanparts.com/catalog/...ACHyd1_pg5.htm
I cut the tiles with a fine tooth blade (Plywood/finidhing blade) on a table saw. Super easy to cut, like butter.
I cut them about a 1/4" from the all and then used the rubber wall base Similar to this http://www.griotsgarage.com/catalog....nown&SKU=92334 I used a tube adhesive and caulking gun.
My pattern is a diamond plate patter
Edge, I actually used the Race Deck Edge in Black I bought the individual peices at Griots garage. http://www.griotsgarage.com/search.jsp?searchtext=edge It works with the moto floor.
If you don't put the foam under the tiles they will make a loud clacking sound.I drove me nuts.
I have not had any problems using my floor jacks I have the Costco Alum Jack and HF Alum Jack both have worked fine no damage. If you plan on using jack stands get Jack stands with a flat plate. Griots used to make them but it looks like they are discontinued. I have a set and love them. Normal jack stands with angle iron will pierce the tiles.
Try these:
http://www.pelicanparts.com/catalog/...ACHyd1_pg5.htm
#10
Originally Posted by deputydog95
the stuff on overstock is a smoking deal. i'd buy it today if i knew i could get the trim pieces for it, which they don't seem to list on the site. it's dirt cheap compared to the prices i've been quoted for racedeck.
#11
i have garagetech.com and completegarage.com coming out on tues to give me estimates. the garagetech stuff is kind of cool because they completely cover your walls with "storewall" material. our house is 40 years old so the walls look kind of ****ty.
#12
Originally Posted by deputydog95
i have garagetech.com and completegarage.com coming out on tues to give me estimates. the garagetech stuff is kind of cool because they completely cover your walls with "storewall" material. our house is 40 years old so the walls look kind of ****ty.
#14
Originally Posted by deputydog95
$5.00 per square foot. holy smokes. what was your total estimate and how big is your garage?
for that price, did that include flooring and cabinets, etc...?
for that price, did that include flooring and cabinets, etc...?
#15
looks like i better get the paint roller out, cause i'm not spending 6g's to just cover the wall. i have completegarage.com coming out in the morning for an estimate. we'll see how that goes.