Mello Yellow wears black condoms
#1
Mello Yellow wears black condoms
Got this idea from Fred (Petfrog), but my costs were more economical (to me). Picked up (20) 3/4" vacuum caps @ $.18 each at a local hardware store (Marshall's). Cut them down to size by slipping them over a 1/2" plumbing pipe to get a clean cut. Slip them over the bolts and walla.
To get them out, use a computer chip extractor.
A must for those with black wheels. I'll let you know if they hold up at 140
To get them out, use a computer chip extractor.
A must for those with black wheels. I'll let you know if they hold up at 140
Last edited by P97; 12-01-2007 at 11:39 AM.
#3
Hey Mellow Yellow I like what you've done. That is a nice feature to disguise the lugs. Love your car.
I'd like to put the vinyl stripe on the wheels of the RS, where did you get these vinyl pin stripes? If you could past that along I would greatly appreciate it.
Thank you and keep working on that beautiful car,
GT3Ranger...Juan
I'd like to put the vinyl stripe on the wheels of the RS, where did you get these vinyl pin stripes? If you could past that along I would greatly appreciate it.
Thank you and keep working on that beautiful car,
GT3Ranger...Juan
#5
Hey Mellow Yellow I like what you've done. That is a nice feature to disguise the lugs. Love your car.
I'd like to put the vinyl stripe on the wheels of the RS, where did you get these vinyl pin stripes? If you could past that along I would greatly appreciate it.
Thank you and keep working on that beautiful car,
GT3Ranger...Juan
I'd like to put the vinyl stripe on the wheels of the RS, where did you get these vinyl pin stripes? If you could past that along I would greatly appreciate it.
Thank you and keep working on that beautiful car,
GT3Ranger...Juan
Wow, an RS along with all your other exotics. Very nice. Here's where you can get the stripes...
http://www.beaverstripes.com/index.asp?cat=167653
The smallest ones they have is 1/4". I used a splitter to get it to 1/8".
David
#6
Hey Mellow Yellow I like what you've done. That is a nice feature to disguise the lugs. Love your car.
I'd like to put the vinyl stripe on the wheels of the RS, where did you get these vinyl pin stripes? If you could past that along I would greatly appreciate it.
Thank you and keep working on that beautiful car,
GT3Ranger...Juan
I'd like to put the vinyl stripe on the wheels of the RS, where did you get these vinyl pin stripes? If you could past that along I would greatly appreciate it.
Thank you and keep working on that beautiful car,
GT3Ranger...Juan
Juan-
They sell the pre-curved wheel stripe sets here:
http://www.europeanautosource.com/pr...oducts_id=1311
I haven't ordered a set from them yet but alot of bimmer guys have them and love them.
Trending Topics
#12
Mesa Grande between Palomar and Julian. We talking boonies and farm lands for miles
https://www.6speedonline.com/forums/...d.php?t=100400
https://www.6speedonline.com/forums/...d.php?t=105360
Try to make our next rally. A heavily modified 930 got up to 160 (km/h that is )
https://www.6speedonline.com/forums/...d.php?t=100400
https://www.6speedonline.com/forums/...d.php?t=105360
Try to make our next rally. A heavily modified 930 got up to 160 (km/h that is )
Last edited by P97; 12-02-2007 at 01:35 AM.
#15
Very good idea. I doubt they'll come off as these rubber pieces don't have enough mass to fling themselves off plus they should have enough "traction" on the lug nuts themselves to keep this from happening.
These caps are used in the R/C (radio controlled) model industry particularly for covering the openings on the engine carburetors and exhaust pipes. The sizes you'll find at hobby shops will probably be too small to fit on these lugs nuts. You'll probably need to go to a hardware store as Juha did.
These caps are used in the R/C (radio controlled) model industry particularly for covering the openings on the engine carburetors and exhaust pipes. The sizes you'll find at hobby shops will probably be too small to fit on these lugs nuts. You'll probably need to go to a hardware store as Juha did.