2007 GT3 - Spin Out Problem
#1
2007 GT3 - Spin Out Problem
Hey Guys,
I am a reasonably accomplished driver and have been tracking a couple other cars for the past two + years . Earlier this year I bought a 2007 GT3 and have taken it to the track several times but have had a problem of the rear end breaking loose and spinning out before I know it. Gonna have a highly regarded shop set up the alignment and corner balance the car tomorrow. Wondering if anyone else has experienced the same problem and what mods/solutions are available.
Appreciate your help.
I am a reasonably accomplished driver and have been tracking a couple other cars for the past two + years . Earlier this year I bought a 2007 GT3 and have taken it to the track several times but have had a problem of the rear end breaking loose and spinning out before I know it. Gonna have a highly regarded shop set up the alignment and corner balance the car tomorrow. Wondering if anyone else has experienced the same problem and what mods/solutions are available.
Appreciate your help.
#2
did you enter turn and reduce throttle input?
if so, you will spin,
slow in fast out. i mean SLOW in. PARK the damn car at corner entery, i mean PARK IT. then increase throttle, NEVER reduce, once you are on throttle, you can only increase, liftting causes spin. no matter what other cars you tracked before, 911 is not a car, it's a demon, takes years to figure it out.
alignment is important. you in LA, alarcon is great, betu as BBI, eric at hergeshiemer, dan at speedgallery, loren at werks 2, to name a few in your area will align it well.
if so, you will spin,
slow in fast out. i mean SLOW in. PARK the damn car at corner entery, i mean PARK IT. then increase throttle, NEVER reduce, once you are on throttle, you can only increase, liftting causes spin. no matter what other cars you tracked before, 911 is not a car, it's a demon, takes years to figure it out.
alignment is important. you in LA, alarcon is great, betu as BBI, eric at hergeshiemer, dan at speedgallery, loren at werks 2, to name a few in your area will align it well.
#3
did you enter turn and reduce throttle input?
if so, you will spin,
slow in fast out. i mean SLOW in. PARK the damn car at corner entery, i mean PARK IT. then increase throttle, NEVER reduce, once you are on throttle, you can only increase, liftting causes spin. no matter what other cars you tracked before, 911 is not a car, it's a demon, takes years to figure it out.
alignment is important. you in LA, alarcon is great, betu as BBI, eric at hergeshiemer, dan at speedgallery, loren at werks 2, to name a few in your area will align it well.
if so, you will spin,
slow in fast out. i mean SLOW in. PARK the damn car at corner entery, i mean PARK IT. then increase throttle, NEVER reduce, once you are on throttle, you can only increase, liftting causes spin. no matter what other cars you tracked before, 911 is not a car, it's a demon, takes years to figure it out.
alignment is important. you in LA, alarcon is great, betu as BBI, eric at hergeshiemer, dan at speedgallery, loren at werks 2, to name a few in your area will align it well.
#4
did you enter turn and reduce throttle input?
if so, you will spin,
slow in fast out. i mean SLOW in. PARK the damn car at corner entery, i mean PARK IT. then increase throttle, NEVER reduce, once you are on throttle, you can only increase, liftting causes spin. no matter what other cars you tracked before, 911 is not a car, it's a demon, takes years to figure it out.
if so, you will spin,
slow in fast out. i mean SLOW in. PARK the damn car at corner entery, i mean PARK IT. then increase throttle, NEVER reduce, once you are on throttle, you can only increase, liftting causes spin. no matter what other cars you tracked before, 911 is not a car, it's a demon, takes years to figure it out.
Start off slow until you understand the characteristics of the car, only then can you begin to truly play around with throttle control in the corners. But Always slow in, fast out with a P-car.
Before going into a corner, you always have to remember "everything is in the back" and balance accordingly. I find it helped me a lot with the whole RR setup when I first jumped into a P-car.
It's a difficult car to get the hang of. I would throw my 4S around corners like it was child's play. Once I got the GT3, it was back to square one almost.
They used to call it the Grim Reaper's company car for a reason. If it is available to you, try the Porsche Driving School.
#5
No psm in 07 gt3 just traction control which is different. Best advice is hire a coach/instructor familiar with the gt3 and drop down a level and learn the car doing DEs and get as much seat time as possible.
Make sure alignment is appropriate. Start with mich PSS tires too.
Make sure alignment is appropriate. Start with mich PSS tires too.
#6
Easily corrected. Check your rear sway bar. For a non-RS 2007 GT3, try the middle setting. Your snap oversteer will disappear. I learned the hard way after several spins.
Also, don't listen to the RS guys for setup advice. The extra rear track width on the RS requires a different set up.
Also, don't listen to the RS guys for setup advice. The extra rear track width on the RS requires a different set up.
#7
Trending Topics
#8
Hey Guys. Really appreciate the advice. Taking the car to "West End Alignment" this morning to have it aligned and corner balanced. Back to he track this week end and plan to work with the instructors. It is a "Demon" but know it'll be a great track car for me once I get it under control! :-)
#10
What mooty said. 911's are a unique creature on the track. Most front engined cars (except perhaps some fiats and S2000s) are very forgiving when you lift mid corner. 911s will spit you off the track backwards, the older ones, like my 964 Turbo being waaaaay worse than the new metal.
#11
Everything said above is the truth. Get some instructor time and leave the nannies on for now.
Also get the car in the air and check to see if your diff is ok. Rear end can be very loose under hard braking (which you do in a 911 prepping for slow-in) if the diff is shot. Factory diffs are fragile
Also get the car in the air and check to see if your diff is ok. Rear end can be very loose under hard braking (which you do in a 911 prepping for slow-in) if the diff is shot. Factory diffs are fragile
#12
Had exactly the same problem, I spun my 07 GT3 a couple of times when I first got it. How I fixed it:
Corner balance
Set rear sway to middle
Swapped Pilot sport cups for Super Sports and now Hoosier R6
Seat time
Good luck great car!
Corner balance
Set rear sway to middle
Swapped Pilot sport cups for Super Sports and now Hoosier R6
Seat time
Good luck great car!
#13
As advised definitely check the alignment and suspension. I hope that you have the stock wheel/tire size. If you have 20 Inch wheels, chances are the car cannot be truly aligned as the side walls are much too stiff (let me know if you want more information on that).
Pay very close attention to the toe adjustment in the rear, as even a tiny amount of toe OUT will make the car incredibly unstable. As such make sure all bushings are checked.
It is worth asking the alignment shop if they know how to check the suspension kinemantics. That is the geometry as the suspension goes through it's up and down travel. For some suspension set-ups (i.e., with aftermarket parts) the rear toe should not be set with the inner eccentric. PM me if you need more information on that.
Also, as said in previous posts 911's must be driven into a corner SLOW and you should only go/roll into the accelerator when you are "absolutely" sure that you don't need or want to come out of the accelerator.
Another point to take into account that the harder you go around a corner the more you unload the inside front tire and more times than not the front inside tire is in the air. When that happens the steering goes very light and it becomes incredibly sensitive to movement.
I don't know if you ride motorcycles or not, but the techniques are very similar for riding a bike and driving a 911.
Having said the above, once you "learn", "master" how to drive them, there is nothing like it.
Cheers.
Pay very close attention to the toe adjustment in the rear, as even a tiny amount of toe OUT will make the car incredibly unstable. As such make sure all bushings are checked.
It is worth asking the alignment shop if they know how to check the suspension kinemantics. That is the geometry as the suspension goes through it's up and down travel. For some suspension set-ups (i.e., with aftermarket parts) the rear toe should not be set with the inner eccentric. PM me if you need more information on that.
Also, as said in previous posts 911's must be driven into a corner SLOW and you should only go/roll into the accelerator when you are "absolutely" sure that you don't need or want to come out of the accelerator.
Another point to take into account that the harder you go around a corner the more you unload the inside front tire and more times than not the front inside tire is in the air. When that happens the steering goes very light and it becomes incredibly sensitive to movement.
I don't know if you ride motorcycles or not, but the techniques are very similar for riding a bike and driving a 911.
Having said the above, once you "learn", "master" how to drive them, there is nothing like it.
Cheers.
#14
pasm only makes shocks stiff or not so stiff, nothing to do with helping you not spin.
if TC came on, you are not driving smoothly.
if your rear comes around as you increase throttle, then you didn't unwind the wheel enough.
lawjdc is right. i drive RS mostly. so i have more rear end grip. you might move the rear bar softer.
however, i also track a 997.1non RS. for ME, the sway bar is useless. i dont feel much difference. but i am also know to drive around the car's prob lol
west end is great, they will set you up.
Last edited by mooty; 06-10-2013 at 09:49 PM.
#15
Everything said above is the truth. Get some instructor time and leave the nannies on for now.
Also get the car in the air and check to see if your diff is ok. Rear end can be very loose under hard braking (which you do in a 911 prepping for slow-in) if the diff is shot. Factory diffs are fragile
Also get the car in the air and check to see if your diff is ok. Rear end can be very loose under hard braking (which you do in a 911 prepping for slow-in) if the diff is shot. Factory diffs are fragile