wheel offset question
#1
03-03-2014 | 11:40 PM
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 58
From: Seoul, Korea
Rep Power: 13
wheel offset question
I was wondering if the following wheel offset is okay with a 2007 997.1 GT3.
24 Bolt Pattern
Front 18" x 10.5" - Inner Rim Half-6" / Outer Rim Half-4.5" 5.5" Backspace
Rears 18" x 12.5" - Inner Rim Half-7.5" Outer Rim Half-5" 7" Backspace
Anyone knows its availability?
24 Bolt Pattern
Front 18" x 10.5" - Inner Rim Half-6" / Outer Rim Half-4.5" 5.5" Backspace
Rears 18" x 12.5" - Inner Rim Half-7.5" Outer Rim Half-5" 7" Backspace
Anyone knows its availability?
#2
03-04-2014 | 10:56 AM
Registered User
Joined: Oct 2009
Posts: 28
From: here
Rep Power: 17
Very different specs than most run (9" ET 48-51mm front, typically 1" outer and 8"inner; 12" ET 58-63mm rear, typically 2" outer and 10" inner).
Based on recent experience on a 997.2 which should be identical, I believe you would have big issues with the width if the fronts, and likely also with the offsets on both front and rear.
Based on recent experience on a 997.2 which should be identical, I believe you would have big issues with the width if the fronts, and likely also with the offsets on both front and rear.
Last edited by RedRSA; 03-04-2014 at 10:59 AM.
#3
03-04-2014 | 09:46 PM
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 58
From: Seoul, Korea
Rep Power: 13
Very different specs than most run (9" ET 48-51mm front, typically 1" outer and 8"inner; 12" ET 58-63mm rear, typically 2" outer and 10" inner). Based on recent experience on a 997.2 which should be identical, I believe you would have big issues with the width if the fronts, and likely also with the offsets on both front and rear.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
930 Turbo Vendor Classifieds
0
08-18-2015 04:01 PM
PelicanParts.com
Boxster/Cayman Vendor Classifieds
0
08-18-2015 03:51 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
08-18-2015 03:42 PM