Dads C63 pulls 700rwhp
#1
Dads C63 pulls 700rwhp
Well almost. We went to a car show/dyno day last week at Titan Motorsports here in Orlando. They gave us a front row seat and the little "c" got a lot of attention.
Then we were allowed to make two pulls. They ask me to make two N/A and then one on nitrous because the crowd wanted to see it run on spray. Obviously I was glad to ablidge.
The two N/A pulls were 510 and 512rwhp with the new MHP cams. Then we hit the spray and the crowd went crazy. It pulled 693rwp. Since it was so close they asked if I wanted to make another nitrous pull so we checked everything and did it again. Here's what we got!! So close!! This motor loves the new cams and spray!!
We had a BLAST!! Here's the dyno video.
Then we were allowed to make two pulls. They ask me to make two N/A and then one on nitrous because the crowd wanted to see it run on spray. Obviously I was glad to ablidge.
The two N/A pulls were 510 and 512rwhp with the new MHP cams. Then we hit the spray and the crowd went crazy. It pulled 693rwp. Since it was so close they asked if I wanted to make another nitrous pull so we checked everything and did it again. Here's what we got!! So close!! This motor loves the new cams and spray!!
We had a BLAST!! Here's the dyno video.
Last edited by Dads C63; 03-16-2012 at 03:06 PM.
#6
Sheesh, that is nice. And I would just like to give you props for saying it's your Dad's (if that's the case) instead of claiming it as your car like most folks would. Respect.
#7
Trending Topics
#10
#13
We went to Bradenton yesterday to test the new found power. Worked pretty good.
It is the stock bottom end and all stock driveline components. The only engine modifications are heads, cams, tune, and obviously headers etc....
Then the 200 shot of nitrous which this motor loves!!
We had a great day all in all. The driveline IS the weak link but we are working on that. Keep racing and be safe!!
Enjoy!
It is the stock bottom end and all stock driveline components. The only engine modifications are heads, cams, tune, and obviously headers etc....
Then the 200 shot of nitrous which this motor loves!!
We had a great day all in all. The driveline IS the weak link but we are working on that. Keep racing and be safe!!
Enjoy!
#14
Impressive- good to know the 63 platform can be made into AN ANIMAL... your in central florida; Renntech i know has a good trans upgrade for your car if it ever started to slip...
Congrats for raising the bar... MHP is a good tuner, they tuned my M6 years back.
Congrats for raising the bar... MHP is a good tuner, they tuned my M6 years back.
Thread
Thread Starter
Forum
Replies
Last Post
vividracing
Mercedes / AMG
2
10-05-2015 12:02 PM