FRAGGLE FEST 2012 March
#16
I'll probably have a set of cat bypass pipes to install on my F355. If someone could help out. I don't have jackstands or a jack either, do you have one low enough for the F355?
I tossed my gear because that DIY shop opened in Dulles, but it recently shut down
*edit* From what I've read it should be a fairly straight forward install, mostly accessible from the top of the engine bay.
I tossed my gear because that DIY shop opened in Dulles, but it recently shut down
*edit* From what I've read it should be a fairly straight forward install, mostly accessible from the top of the engine bay.
#17
Leaving from Katies works...Fraggle just make sure this time we take a simple non-traffic route...highways are fine, whechever one we can avoid traffic that was a nightmare last time! Oh and see if your Asian friends can hook up the DimSum again, that was off the hook!!
#18
I'm sure I've got the right gear for the 355 exhaust install, top or bottom. My 928 has barely a fistful of cleanance in the front and my jack fits under there.
Sunir!!
Yeah we got screwed last time on the damn traffic. I'll work out a couple of routes so we don't get stuck this time.
Sunir!!
Yeah we got screwed last time on the damn traffic. I'll work out a couple of routes so we don't get stuck this time.
#19
Now things are starting to come together!
OK folks put in yer food orders can I'll figure out what I can provide vs what people may need to bring.
Let's hope for a NICE FREAKING DAY.
OK folks put in yer food orders can I'll figure out what I can provide vs what people may need to bring.
Let's hope for a NICE FREAKING DAY.
#21
1. Sunir [aston or gt2]
2. Scott [996]
3. Airbrush1 [vette]
4. Drummerboy [lotus]
5. simtiaz [997]
6. Scott #2 [930]
6. Lead Foot Cobra [cobra]
7. bimmer32five [bmw]
8. Tonk [bmw]
9. sempaipaul [porsche]
10. st4rk [CAT BYPASS INSTALL]
11. BOBP [?]
I figure we hang at Katies until it clears out then head over to my place.
Going direct from Katies it's ~60minutes. Traffic on this route is usually cake. This it the way I usually run to Katies..
http://maps.google.com/maps?saddr=Br...1,2,3&t=m&z=11
Last years ATTEMPTED route is 1hr 24min and includes more Fahrspaß. Unless, of course, we get stuck in a massive traffic jam on 95 and end up aborting.
http://maps.google.com/maps?saddr=Br...ia=1,3&t=m&z=9
The Taiwan contingent that came last year with some great food has shipped back so we'll have to come up with a new menu.
Any suggestions? Volunteers? My wife loves to cook so bring it on!
Remember significant others are welcome to come too!
2. Scott [996]
3. Airbrush1 [vette]
4. Drummerboy [lotus]
5. simtiaz [997]
6. Scott #2 [930]
6. Lead Foot Cobra [cobra]
7. bimmer32five [bmw]
8. Tonk [bmw]
9. sempaipaul [porsche]
10. st4rk [CAT BYPASS INSTALL]
11. BOBP [?]
I figure we hang at Katies until it clears out then head over to my place.
Going direct from Katies it's ~60minutes. Traffic on this route is usually cake. This it the way I usually run to Katies..
http://maps.google.com/maps?saddr=Br...1,2,3&t=m&z=11
Last years ATTEMPTED route is 1hr 24min and includes more Fahrspaß. Unless, of course, we get stuck in a massive traffic jam on 95 and end up aborting.
http://maps.google.com/maps?saddr=Br...ia=1,3&t=m&z=9
The Taiwan contingent that came last year with some great food has shipped back so we'll have to come up with a new menu.
Any suggestions? Volunteers? My wife loves to cook so bring it on!
Remember significant others are welcome to come too!
#23
I see that you guys are rolling after C&C, what time does it usually let up? I have another meet that I am obligated to be at, but would like to come out and meet some 6speeders. I'll be in Manassas, so I'll just be around the corner.
Tom
Tom
#26
:thumbup: I'll probably be at the PTuning meet til about 1, all depending on what time my Dyno run is. I should be able to bring by some food, I'm going to try to break out the Smoker on Friday.
Would it be possible to PM me the address? I understand, if not.
Would it be possible to PM me the address? I understand, if not.
Last edited by Nandska; 02-13-2012 at 10:26 AM.
#28
Tom?
#29
I'll probably have a set of cat bypass pipes to install on my F355. If someone could help out. I don't have jackstands or a jack either, do you have one low enough for the F355?
I tossed my gear because that DIY shop opened in Dulles, but it recently shut down
*edit* From what I've read it should be a fairly straight forward install, mostly accessible from the top of the engine bay.
I tossed my gear because that DIY shop opened in Dulles, but it recently shut down
*edit* From what I've read it should be a fairly straight forward install, mostly accessible from the top of the engine bay.
B man,
When did you get the 355? With the cat bypass the car is going to be a intoxicating and I can't wait to hear it.