My GTR build heavy mods over the past few years
#1
My GTR build heavy mods (Switzer P800 to E1K DYNO results on page 5)
Hi guys,
I have lurked on 6 speed a long time and finally joined. So I figured I would start a thread with some info on how my GTR has evolved since I got it a few years ago.
Here is a list of the current mods;
EXTERIOR
-Top Racing dry carbon hood (painted body color) with aero catch flush latches
-Top Racing dry carbon front bumper (painted body color on the "outside" with the dry carbon center and splitter)
-Custom reinforcement bar powder coated black with additional tow hook locations and cooling passages
-Top Racing dry carbon lower rear valance
-Craftsquare Super GT carbon mirrors
-factory side skirts painted body color
-Titek carbon vents
-PWJDM rear carbon canards
-PWJDM mid height carbon rear wing on factory deck lid (for street use)
-Aeromotion active rear wing mounted on AMS carbon deck lid (for track use)
-Tommy K smoked led front side markers
-Tommy K smoked led rear side markers
-smoked rear tail lights
-painted all emblems and door handles flat black
**All exposed carbon was refinished in matte
WHEELS AND TIRES
Street
-ADV 10 3 piece finished with matte black center and brushed gunmetal lip and barrel tinted clear. Specs are 21x10.5 and 21x12 running Pirelli's. 295/25/21 front and 375/20/21 rear.
Road Course
-2 sets of HRE 18 inch C90's finished in flat black running Hoosier R100's
Drag-strip
18 inch Volk TE37SL's running MandH drag master drag radials
PERFORMANCE (P800 currently installed but undergoing a change to an E1K see below)
-Switzer P800 pkg. ( I didn't want to list all the individual components in the pkg because it is a lot of parts, feel free to ask if you are not familiar with what is in the P800 pkg)
-AAM downpipes
-CBRD mid pipe
-HKS Legamax rear exhaust
ENGINE BAY AND INTERIOR
-PWJDM carbon battery and brake covers
-PWJDM carbon plenum cover
-PWJDM carbon cooling shroud
-PWJDM carbon kick plates (door sills)
-PWJDM carbon rear speaker shelf with rear seat belt delete
-rear seat delete
-T1 carbon seats (street and dragstrip)
-Racetech seats (for the road course)
-6 point "half cage" with swingout/removable door bars
-Schroth 6 point harnesses
-Willall shift light
BRAKES AND SUSPENSION
-JRZ RS pro's running 1200/1000 spring combo
-Dodson front upper control arms
-Dodson rear lower control arms
-Stillen adjustable sway bars
-Braided brake lines
-PFC rotors with PFC pads
-Willall brake mister system
COOLING
-Switzer upgraded radiator pkg
-Custom front mounted trans cooler (running Willall pan with Albins external pump to a Setrab core)
-Custom oil coolers (running two Setrab cores)
-Custom front diff cooler (running Willall fittings and pump to Setrab core)
-Custom power steering cooler (relocated and upgraded to Setrab core)
-Willall rear diff cooler
-Willall larger oil pan
Those are the mods currently. A few days ago I shipped the car to Switzer for their flex fuel E1K set up. The mods for this stage are listed below.
The full build sheet:
Switzer Flex Fuel E1K GTR PKG
- Switzer Hybrid Standalone Engine Management System
- Switzer Flex Fuel System
- Switzer E1K Fuel Injector Kit
- Switzer Monster Intercooler Kit
- Switzer E1K Turbochargers and Manifold Assembly (req's good cores)
- Switzer E1K External Wastegate Assembly
- COBB AccessPORT W/TCM Capability (NIS-006)
- Switzer E1K Calibration for COBB AP
- Switzer MAF/Intake and Filter Assembly
- Switzer High-Flow E1K Intakes for Switzer MAF
- Switzer E1K Catless Off-Road Test Pipes
- Switzer E1K Fuel System Upgrades
- Lightweight 90mm Stainless Full Exhaust
- Switzer Cooling Package
Switzer Stage 4 Transmission Upgrade by ShepTrans, Exclusive transmission builder of Switzer Performance
- PPG 6 GEAR SET
- SWITZER-SPEC CLUTCH
- FWD RETAINER
- MECHANICAL LOCK #1
- MECHANICAL LOCK #2
- O-RING AND SEAL UPGRADE KIT
- OIL PUMP SHAFT UPGRADE WITH BLUEPRINT
- 6 NEODYMIUM MAGNETS
- HIGH TEMP REAR DIFFERENTIAL OIL SEAL
- STAINLESS REUSABLE INTERNAL FILTER
- R35 GTR TRANSMISSION COOLER
- GR6 TRANSMISSION FLUID
Switzer Stage 1 VR38DETT Engine Build
- SWITZER SPEC MAHLE PISTONS, PINS, AND RINGS
- SWITZER SPEC CARILLO CONNECTING RODS
- SWITZER SPEC CAMSHAFTS
- SWITZER BLUEPRINTED ENGINE AND OIL PUMP
- SWITZER SPEC NISSAN ENGINE COMPONENTS
Hopefully Neil will see this thread and update the progress and post a few pics
Thanks for looking
I have lurked on 6 speed a long time and finally joined. So I figured I would start a thread with some info on how my GTR has evolved since I got it a few years ago.
Here is a list of the current mods;
EXTERIOR
-Top Racing dry carbon hood (painted body color) with aero catch flush latches
-Top Racing dry carbon front bumper (painted body color on the "outside" with the dry carbon center and splitter)
-Custom reinforcement bar powder coated black with additional tow hook locations and cooling passages
-Top Racing dry carbon lower rear valance
-Craftsquare Super GT carbon mirrors
-factory side skirts painted body color
-Titek carbon vents
-PWJDM rear carbon canards
-PWJDM mid height carbon rear wing on factory deck lid (for street use)
-Aeromotion active rear wing mounted on AMS carbon deck lid (for track use)
-Tommy K smoked led front side markers
-Tommy K smoked led rear side markers
-smoked rear tail lights
-painted all emblems and door handles flat black
**All exposed carbon was refinished in matte
WHEELS AND TIRES
Street
-ADV 10 3 piece finished with matte black center and brushed gunmetal lip and barrel tinted clear. Specs are 21x10.5 and 21x12 running Pirelli's. 295/25/21 front and 375/20/21 rear.
Road Course
-2 sets of HRE 18 inch C90's finished in flat black running Hoosier R100's
Drag-strip
18 inch Volk TE37SL's running MandH drag master drag radials
PERFORMANCE (P800 currently installed but undergoing a change to an E1K see below)
-Switzer P800 pkg. ( I didn't want to list all the individual components in the pkg because it is a lot of parts, feel free to ask if you are not familiar with what is in the P800 pkg)
-AAM downpipes
-CBRD mid pipe
-HKS Legamax rear exhaust
ENGINE BAY AND INTERIOR
-PWJDM carbon battery and brake covers
-PWJDM carbon plenum cover
-PWJDM carbon cooling shroud
-PWJDM carbon kick plates (door sills)
-PWJDM carbon rear speaker shelf with rear seat belt delete
-rear seat delete
-T1 carbon seats (street and dragstrip)
-Racetech seats (for the road course)
-6 point "half cage" with swingout/removable door bars
-Schroth 6 point harnesses
-Willall shift light
BRAKES AND SUSPENSION
-JRZ RS pro's running 1200/1000 spring combo
-Dodson front upper control arms
-Dodson rear lower control arms
-Stillen adjustable sway bars
-Braided brake lines
-PFC rotors with PFC pads
-Willall brake mister system
COOLING
-Switzer upgraded radiator pkg
-Custom front mounted trans cooler (running Willall pan with Albins external pump to a Setrab core)
-Custom oil coolers (running two Setrab cores)
-Custom front diff cooler (running Willall fittings and pump to Setrab core)
-Custom power steering cooler (relocated and upgraded to Setrab core)
-Willall rear diff cooler
-Willall larger oil pan
Those are the mods currently. A few days ago I shipped the car to Switzer for their flex fuel E1K set up. The mods for this stage are listed below.
The full build sheet:
Switzer Flex Fuel E1K GTR PKG
- Switzer Hybrid Standalone Engine Management System
- Switzer Flex Fuel System
- Switzer E1K Fuel Injector Kit
- Switzer Monster Intercooler Kit
- Switzer E1K Turbochargers and Manifold Assembly (req's good cores)
- Switzer E1K External Wastegate Assembly
- COBB AccessPORT W/TCM Capability (NIS-006)
- Switzer E1K Calibration for COBB AP
- Switzer MAF/Intake and Filter Assembly
- Switzer High-Flow E1K Intakes for Switzer MAF
- Switzer E1K Catless Off-Road Test Pipes
- Switzer E1K Fuel System Upgrades
- Lightweight 90mm Stainless Full Exhaust
- Switzer Cooling Package
Switzer Stage 4 Transmission Upgrade by ShepTrans, Exclusive transmission builder of Switzer Performance
- PPG 6 GEAR SET
- SWITZER-SPEC CLUTCH
- FWD RETAINER
- MECHANICAL LOCK #1
- MECHANICAL LOCK #2
- O-RING AND SEAL UPGRADE KIT
- OIL PUMP SHAFT UPGRADE WITH BLUEPRINT
- 6 NEODYMIUM MAGNETS
- HIGH TEMP REAR DIFFERENTIAL OIL SEAL
- STAINLESS REUSABLE INTERNAL FILTER
- R35 GTR TRANSMISSION COOLER
- GR6 TRANSMISSION FLUID
Switzer Stage 1 VR38DETT Engine Build
- SWITZER SPEC MAHLE PISTONS, PINS, AND RINGS
- SWITZER SPEC CARILLO CONNECTING RODS
- SWITZER SPEC CAMSHAFTS
- SWITZER BLUEPRINTED ENGINE AND OIL PUMP
- SWITZER SPEC NISSAN ENGINE COMPONENTS
Hopefully Neil will see this thread and update the progress and post a few pics
Thanks for looking
Last edited by BoulderGTR; 02-28-2012 at 09:52 PM. Reason: title change
#6
Thanks for the compliment. What cars are you bringing down to Texas? I assume your Z and your GTT? Looking forward to seeing you in Texas
-Jason
#7
Exactly. Left the Z home last year and rented a Miata for GrandSport. Really missed tracking the Z so it will be making a return trip.
Trending Topics
#12
I'll run Z in 1/4 for sure. May run the TTG down a couple times for fun
#15
Jason...I've always admired your posts about your GTR over on NAGROC...beautiful piece of machinery you have and great combination of changes on the ride. Looks like our GTR's will be shop buddies...my ride will start it's journey to Ohio 2/1/12 for a couple months of work.
Plan to take a trip up their with my local wrench in March or April to see the shop and meet the guys who are up to their armpits in the innards of my ride...hopefully I get to see your ride in person.
Jon (AMGfan on NAGTROC, MBWorld, and L4P)
Plan to take a trip up their with my local wrench in March or April to see the shop and meet the guys who are up to their armpits in the innards of my ride...hopefully I get to see your ride in person.
Jon (AMGfan on NAGTROC, MBWorld, and L4P)