When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After doing much research, I believe that I will be replacing the dreaded turbo oil screen on my 2014 V8.
Have any of you done this and do I need to remove the entire front bumper cover to get at the fasteners for the oil separator or can I pull the front cover down a bit and reach
them?
lots of Audi videos about doing this but nothing for our Bentley’s.
The issue you’ll have is removing the oil separate. It will hit the radiator fans when you slide it forward before the piping comes free. You would have to loosen and slide the front end module(radiator pack) forward a bit to make space.
So I must pull the fenders (wings) and bumper cover and put the radiator into the service position as the only way to remove the oil separator?
no easier way?