Ugh... I did it again... Got another 996tt.
#1
Ugh... I did it again... Got another 996tt.
After having 4 or 5 996tts with up to 850hp, and then upgrading to a 997.2TT Cab, I sold my last turbo in hopes of saving up for a 997tt coupe 6-sp manual or a 991tt pdk. Unfortunately, I ended up selling the 997.2TT at the worst time in the market and now everything has gone completely insane in price. Had to get into yet another 996tt coupe due to budget. Im sure things have changed quite a bit since my last build, so I figured Id ask for a little of the most current "best thing."
Car is completely bone stock with the exception of a widebody kit, an exhaust, and some silicone upgraded boost hoses - All show and No Go by the previous owner.
I want to start with:
Tune - Going with Sam, since he does all my in-house customer tunes at the shop
SSK - Which is the preferred setup? I believe I had some version of the OEM short shifter in my last car and it was amazing. Not sure if anything else has come out since then.
Any other easy, hp-yielding mods out there to do at the same time? Plenum?
Car is completely bone stock with the exception of a widebody kit, an exhaust, and some silicone upgraded boost hoses - All show and No Go by the previous owner.
I want to start with:
Tune - Going with Sam, since he does all my in-house customer tunes at the shop
SSK - Which is the preferred setup? I believe I had some version of the OEM short shifter in my last car and it was amazing. Not sure if anything else has come out since then.
Any other easy, hp-yielding mods out there to do at the same time? Plenum?
#2
After having 4 or 5 996tts with up to 850hp, and then upgrading to a 997.2TT Cab, I sold my last turbo in hopes of saving up for a 997tt coupe 6-sp manual or a 991tt pdk. Unfortunately, I ended up selling the 997.2TT at the worst time in the market and now everything has gone completely insane in price. Had to get into yet another 996tt coupe due to budget. Im sure things have changed quite a bit since my last build, so I figured Id ask for a little of the most current "best thing."
Car is completely bone stock with the exception of a widebody kit, an exhaust, and some silicone upgraded boost hoses - All show and No Go by the previous owner.
I want to start with:
Tune - Going with Sam, since he does all my in-house customer tunes at the shop
SSK - Which is the preferred setup? I believe I had some version of the OEM short shifter in my last car and it was amazing. Not sure if anything else has come out since then.
Any other easy, hp-yielding mods out there to do at the same time? Plenum?
Car is completely bone stock with the exception of a widebody kit, an exhaust, and some silicone upgraded boost hoses - All show and No Go by the previous owner.
I want to start with:
Tune - Going with Sam, since he does all my in-house customer tunes at the shop
SSK - Which is the preferred setup? I believe I had some version of the OEM short shifter in my last car and it was amazing. Not sure if anything else has come out since then.
Any other easy, hp-yielding mods out there to do at the same time? Plenum?
At least there will be no "surprises" for you while making the car your own! I would also stick with Sam given you know him and his work and continuing after sale(s) support. I would also stick with the 997 ssk unless the Numeric is an option. When they say "rifle bolt action" they ain't kidding. Sometimes I wish I'd swapped for it.
That said, I've never been unhappy about keeping the 997 ssk even though the 1/2 shift I will never get full used to regardless of shifter. It's the throw that could be "improved". I went with the IPD 68mm ( from Sam ) and while I was sure ten years ago upon installation that I felt an increase in mid range TQ. Today? I couldn't tell you if it was "worth" it and I was happy with the 5 bar FPR and opted to forgo larger injectors. I didn't want to mess with a larger 74 TB and any adjustments was the car was just canyon carving and mid range was where it "lived" mostly. All I know is IPD's white paper dyno charts re increased HP? are mythical at best.
Now I mostly just look at the car so it's all academic.
GL in your new project! We could all do a lot worse than a 996 Turbo! I was thinking of a Safari build for the coming Mad Max world soon to commence.
#3
Congrats on the pickup. It's very telling when owing to the current economics you are forced to remain on the 996 TT platform. I would also like to have upgraded to the 991 PDK iteration but chose to retire comfortably while I continue to attempt reaching 300k miles on my now second 996 TT.
At least there will be no "surprises" for you while making the car your own! I would also stick with Sam given you know him and his work and continuing after sale(s) support. I would also stick with the 997 ssk unless the Numeric is an option. When they say "rifle bolt action" they ain't kidding. Sometimes I wish I'd swapped for it.
That said, I've never been unhappy about keeping the 997 ssk even though the 1/2 shift I will never get full used to regardless of shifter. It's the throw that could be "improved". I went with the IPD 68mm ( from Sam ) and while I was sure ten years ago upon installation that I felt an increase in mid range TQ. Today? I couldn't tell you if it was "worth" it and I was happy with the 5 bar FPR and opted to forgo larger injectors. I didn't want to mess with a larger 74 TB and any adjustments was the car was just canyon carving and mid range was where it "lived" mostly. All I know is IPD's white paper dyno charts re increased HP? are mythical at best.
Now I mostly just look at the car so it's all academic.
GL in your new project! We could all do a lot worse than a 996 Turbo! I was thinking of a Safari build for the coming Mad Max world soon to commence.
At least there will be no "surprises" for you while making the car your own! I would also stick with Sam given you know him and his work and continuing after sale(s) support. I would also stick with the 997 ssk unless the Numeric is an option. When they say "rifle bolt action" they ain't kidding. Sometimes I wish I'd swapped for it.
That said, I've never been unhappy about keeping the 997 ssk even though the 1/2 shift I will never get full used to regardless of shifter. It's the throw that could be "improved". I went with the IPD 68mm ( from Sam ) and while I was sure ten years ago upon installation that I felt an increase in mid range TQ. Today? I couldn't tell you if it was "worth" it and I was happy with the 5 bar FPR and opted to forgo larger injectors. I didn't want to mess with a larger 74 TB and any adjustments was the car was just canyon carving and mid range was where it "lived" mostly. All I know is IPD's white paper dyno charts re increased HP? are mythical at best.
Now I mostly just look at the car so it's all academic.
GL in your new project! We could all do a lot worse than a 996 Turbo! I was thinking of a Safari build for the coming Mad Max world soon to commence.
Thank you for the write-up. Is there a difference between the 997SSK and the 997 Gt3 shifter or are they one in the same? I heard the 997ssk isnt much of an improvement at all - I think i read something like only a 15% reduction in throw. Id like to go with something a bit more aggressive than that - Ill look into the numeric kit. Have you seen this option from function first?:
Function First shifter
#4
Over the years of owning like 5 of these cars, I always thought these cars were epicly undervalued and I kick myself for not keeping any of them - my last black on black 03 coupe with 850hp was probably the best car I ever owned and shouldve been a forever car...
Thank you for the write-up. Is there a difference between the 997SSK and the 997 Gt3 shifter or are they one in the same? I heard the 997ssk isnt much of an improvement at all - I think i read something like only a 15% reduction in throw. Id like to go with something a bit more aggressive than that - Ill look into the numeric kit. Have you seen this option from function first?:
Function First shifter
Thank you for the write-up. Is there a difference between the 997SSK and the 997 Gt3 shifter or are they one in the same? I heard the 997ssk isnt much of an improvement at all - I think i read something like only a 15% reduction in throw. Id like to go with something a bit more aggressive than that - Ill look into the numeric kit. Have you seen this option from function first?:
Function First shifter
Yes, have seen the FF offerings over the years and never bothered to further investigate and have not knowingly driven a car with them installed. That said, beyond the rifle bolt action of the Numeric. I've always setteled for that -15% throw that the 997 ssk provides. I'm not sure anything can improve the "1/2" shift so I've never really tried.
If I was young ( and or "new" to the platform? ) I would opt for the Numeric for sure.
Cool that you're on your fifth?! I'm stuck with my second TT ( bolt on 550 hp max ) and am "done". About to fire 'er up right now in fact. Sunday AM drive when the idiots are still hopefully still asleep!
Cheers and GL making the "newest" one "yours"!
#6
After having 4 or 5 996tts with up to 850hp, and then upgrading to a 997.2TT Cab, I sold my last turbo in hopes of saving up for a 997tt coupe 6-sp manual or a 991tt pdk. Unfortunately, I ended up selling the 997.2TT at the worst time in the market and now everything has gone completely insane in price. Had to get into yet another 996tt coupe due to budget. Im sure things have changed quite a bit since my last build, so I figured Id ask for a little of the most current "best thing."
Car is completely bone stock with the exception of a widebody kit, an exhaust, and some silicone upgraded boost hoses - All show and No Go by the previous owner.
I want to start with:
Tune - Going with Sam, since he does all my in-house customer tunes at the shop
SSK - Which is the preferred setup? I believe I had some version of the OEM short shifter in my last car and it was amazing. Not sure if anything else has come out since then.
Any other easy, hp-yielding mods out there to do at the same time? Plenum?
Spoiler
I want to start with:
Tune - Going with Sam, since he does all my in-house customer tunes at the shop
SSK - Which is the preferred setup? I believe I had some version of the OEM short shifter in my last car and it was amazing. Not sure if anything else has come out since then.
Any other easy, hp-yielding mods out there to do at the same time? Plenum?
Last edited by KennethBlount; 08-20-2024 at 06:06 AM.
#7
switching to a different tune? PM me a price. Thanks
Trending Topics
#8
Yes, and thanks for the reply.
Yes, have seen the FF offerings over the years and never bothered to further investigate and have not knowingly driven a car with them installed. That said, beyond the rifle bolt action of the Numeric. I've always setteled for that -15% throw that the 997 ssk provides. I'm not sure anything can improve the "1/2" shift so I've never really tried.
If I was young ( and or "new" to the platform? ) I would opt for the Numeric for sure.
Cool that you're on your fifth?! I'm stuck with my second TT ( bolt on 550 hp max ) and am "done". About to fire 'er up right now in fact. Sunday AM drive when the idiots are still hopefully still asleep!
Cheers and GL making the "newest" one "yours"!
Yes, have seen the FF offerings over the years and never bothered to further investigate and have not knowingly driven a car with them installed. That said, beyond the rifle bolt action of the Numeric. I've always setteled for that -15% throw that the 997 ssk provides. I'm not sure anything can improve the "1/2" shift so I've never really tried.
If I was young ( and or "new" to the platform? ) I would opt for the Numeric for sure.
Cool that you're on your fifth?! I'm stuck with my second TT ( bolt on 550 hp max ) and am "done". About to fire 'er up right now in fact. Sunday AM drive when the idiots are still hopefully still asleep!
Cheers and GL making the "newest" one "yours"!
Thank you!!! the car is wild with the bodkit. Now onto the power adders
Thread
Thread Starter
Forum
Replies
Last Post
deandob
997 Turbo / GT2
10
08-08-2015 08:20 AM