2019 Vantage No infotainment or drive mode selectability
#1
2019 Vantage No infotainment or drive mode selectability
Excited to be part of AM owners!
Hoping for a pointer or two here. Been rebuilding a crash damaged 2019 Vantage with front and rear damage: hood, bumpers, parking sensors, cameras etc.
Odd part is that the car came with neither the infotainment screen nor the lower control panel/centre console working. No joy on the media wheel, or the touch panel/surface. The trans buttons work fine, car starts just fine, can turn on flashers too.
Can't get to Sport+ or Track mode or adjust suspension either. Nothing happens when I hit the buttons on steering wheel.
Pulled the codes and I get "communication with Lower Control Panel has a malfunction" and "communication with head unit has a malfunction" DTCs. U1155FF & U0147FA, respectively.
Checked all cabin fuses and swapped every fuse that would touch the amp, centre stack, drive unit, IP fuse box B power, multimedia box etc. with new easyID ones. Still no joy.
Is tearing out the whole centre console and then disconnect / reconnect harnesses for it and swapping out the lower control panel basically the next resort? or does anyone have any guidance I could try?
Would really appreciate some help.
Cheers!
Hoping for a pointer or two here. Been rebuilding a crash damaged 2019 Vantage with front and rear damage: hood, bumpers, parking sensors, cameras etc.
Odd part is that the car came with neither the infotainment screen nor the lower control panel/centre console working. No joy on the media wheel, or the touch panel/surface. The trans buttons work fine, car starts just fine, can turn on flashers too.
Can't get to Sport+ or Track mode or adjust suspension either. Nothing happens when I hit the buttons on steering wheel.
Pulled the codes and I get "communication with Lower Control Panel has a malfunction" and "communication with head unit has a malfunction" DTCs. U1155FF & U0147FA, respectively.
Checked all cabin fuses and swapped every fuse that would touch the amp, centre stack, drive unit, IP fuse box B power, multimedia box etc. with new easyID ones. Still no joy.
Is tearing out the whole centre console and then disconnect / reconnect harnesses for it and swapping out the lower control panel basically the next resort? or does anyone have any guidance I could try?
Would really appreciate some help.
Cheers!
#3
Everything on the centre stack is attached how its supposed to be, at least visually: the screen, the buttons etc. Even HVAC works fine.
Thread
Thread Starter
Forum
Replies
Last Post