HRE Monoblok 43 Design
#31
You statement is not effective as I do not know the wheels will fit correctly and that's why I ask the offsets. I know what the OEM are and they are way off from what I want.
#34
why dont you tell me what you want and I will see what I can do. If we feel it is safe and correct for the car we may be able to do it for you. I can tell you as a company we have built 3 piece 12" wide for the rear of a 360, but feel it is aggressive.
Never hurts to ask though. Let me know and I will go to work.
Never hurts to ask though. Let me know and I will go to work.
#35
The 325 is a dead-on replacement for the 275/40-18. It's also same tire used on the GT2.
With the correct rear offset of 50-52 mm it sits perfectly where it should w/o being tucked under the rear fender lip.
So 11.5"-12" is an ideal width according to Michelin. I believe it's TechArt that uses 11.5 on their Porsches.
#39
So it does not surprise me and I appreciate the efforts.
Last edited by Gcalo; 08-27-2008 at 09:41 PM.
#41
I like the 11" rear because the car really doesn't have the room in the front to put a huge tire to balance things out (if you have a huge rear tire). We have done 12's before, and although they look awesome, they introduce a pretty good deal of understeer into a car that has a slight understeering bias from the factory. We try to be a tiny bit conservative with our monoblok line too, but have the capability to get to pretty much any reasonable offset that the customer is looking for.
#44
That's my situation but it's curable!
The third wheel down, that's the P40? It only is available in 11" widths for the 360?
What is its offset for the 360 please, Marc?
The third wheel down, that's the P40? It only is available in 11" widths for the 360?
What is its offset for the 360 please, Marc?
Last edited by Gcalo; 08-28-2008 at 06:55 PM.
#45
the p40's are an awesome choice. thats what i have on my car