I've got a 2009 Charger SRT-8 that I'm thinking of changing the wheels on. It wears 20" x 9.0 rims with 245/45 Z-rated rubber and TPMS sensors in the wheels that read actual numbers in the display. After looking at Tire Racks site, I didn't care for any of the "recommended" wheels. I'd like to stay at the same rim diameter to use existing tires and TPMS modules. I don't know the offset. Any suggestions as where else to look? TIA

 

i did see a charger with challenger srt 8 wheels and it didnt look to bad.

 

The stock wheels are 25.5 mm offset.

 

Lx forums or charger forums, both Lx platform sites with a lot of pictures of members cars with different set-ups. I had staggered 3 piece ID wheels on my SRT they were sharp looking.

 

We have a customer that was working on some Challenger projects, one was the grey color and the other was the Tomato Red...kind of Orange colored car. With both cars having some of the trim in a charcoal we did this sample in the 501 that was a brushed and grey combination, and then just added the car color in a subtle fashion to tie it all in...the orange was a bit off but this was just a sample for the concept...the area on the center is a ball end mill machined groove...and we finished it off with a dual pinstripe to tie in the car color and the silver brush in the wheel.

The next sample is our 515 that was done in a brushed and grey combo with Red detail to match the brembo brakes, and finished with a std outer.
I also did another 515 with just the grey and brush with a std outer...this looked pretty clean.

I hope this information is useful...feel free to PM me if you are interested, also you can check out website and pic a wheel design that you can color match in our wheel configurator.

Regards,
Jim