This Matte White Mercedes Benz CLS63 AMG is a power house straight out of the factory with 550-hp and a peak torque of 590 lb per ft. After Hennessey Performance was done with it, it feels as if they installed a nuclear reactor which outputs an amazing 700 bhp, 5,200 rpm, 800 ft-lbs of torque, and 3,800 rpm. Needless to say this AMG63 was all dressed up, but with no wheels to go! That’s where the team at Rennen International stepped in to apply our close understanding of power displacement, torque and control. We know that with that amount of power you need to be sure that your wheels will be able to withstand the power of that “reactor” and be able to stick to the road, so we set this beauty up on a set from our NEW RL series from Rennen Forged Wheels.
The RL (short for reverse lip) brings the best of both worlds together with the strength and performance of a forged monoblock, with a fully forged center/outer combination and the aggressive concavity and deep lip of an Xtreme Concave 3-PC Wheel. Rennen is the first company to introduce this type of product. Recently, we have seen several companies follow us in introducing similar renditions of our exclusive wheel technology. The Rennen RL series has the aesthetic of a monoblock, with the never before available option of increasing width by half- inch increments going up to 14” in width with a huge range of offset and concave configurations! Say hello to the Rennen RL-55, seen here custom finished in Matte Graphite staggered at 21x9” front and 21x11” rear.
http://www.flickr.com/photos/renneninternational/8368018193/ [url=http://www.flickr.com/people/renneninternational/] url]
http://www.flickr.com/photos/renneninternational/8369085032/ by http://www.flickr.com/photos/renneninternational/8368018631/ [url=http://www.flickr.com/people/renneninternational/] url]