Fixing rims in the SF Bay Area
#1
11-10-2006 | 04:13 AM
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 147
From: San Mateo
Rep Power: 0
Fixing rims in the SF Bay Area
3 of my rims on my Lexus are bended and all 3 are losing air. In addition, they are not balanced as well since the weights have fallen off. Can anyone recommend a place in the area to get it fixed? What would be the approximately cost per rims? (they are slightly bend with multiple bend on 2 wheels) Most importantly, a place that is close to San Mateo and a relatively quick turnaround time? Thanks!
#3
11-10-2006 | 01:35 PM
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 147
From: San Mateo
Rep Power: 0
Originally Posted by melsta
you can try rooling stock in sf its between 17th -18th street on south vanness you have to bring them in to get an estimate it shouldnt cost more then 100 bux unless its in very bad condition
#4
11-10-2006 | 08:03 PM
Registered User
Joined: Oct 2004
Posts: 6,788
From: SFBA
Rep Power: 343
wheel technique in SJ near airport
or
wheel america in hayward
neither are really great and both will set you back $200-250/wheel to fix the bend since they have to strip the paint, heat up the wheel and reshape it. You may want to look for aftermarket or take off wheels instead.
or
wheel america in hayward
neither are really great and both will set you back $200-250/wheel to fix the bend since they have to strip the paint, heat up the wheel and reshape it. You may want to look for aftermarket or take off wheels instead.
#6
11-10-2006 | 09:42 PM
Registered User
Joined: Apr 2006
Posts: 5,259
From: Austin
Rep Power: 768
Originally Posted by BB987
3 of my rims on my Lexus are bended and all 3 are losing air. In addition, they are not balanced as well since the weights have fallen off. Can anyone recommend a place in the area to get it fixed? What would be the approximately cost per rims? (they are slightly bend with multiple bend on 2 wheels) Most importantly, a place that is close to San Mateo and a relatively quick turnaround time? Thanks!
#7
11-12-2006 | 04:19 AM
Awaiting Email Confirmation
Joined: Feb 2005
Posts: 463
From: bay area (east bay)
Rep Power: 0
Trending Topics
#10
11-21-2006 | 03:51 PM
Registered User
Joined: Jun 2004
Posts: 1,522
From: San Francisco
Rep Power: 82
These guys, at 5th & Howard in SF, did a great job on curb rash. Don't know how they's do on more serious repairs. http://www.kwicksilversf.com/b%26a.htm
Last edited by fdb996c2; 11-30-2006 at 08:05 PM.
#12
12-05-2006 | 02:49 AM
Former Vendor
Joined: May 2004
Posts: 2,173
From: Monterey Park, CA
Rep Power: 0
You should expect to pay 125-150 per each. If they are all one piece which I'm guessing they are then you should be right around $125 per each with paint or polishing. If they need diamond cutting then you'll pay more.
Good Luck,
-Eli
Good Luck,
-Eli
#13
12-05-2006 | 10:18 PM
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 147
From: San Mateo
Rep Power: 0
Originally Posted by FastForwardwheels
You should expect to pay 125-150 per each. If they are all one piece which I'm guessing they are then you should be right around $125 per each with paint or polishing. If they need diamond cutting then you'll pay more.
Good Luck,
-Eli
Good Luck,
-Eli
Thread
Thread Starter
Forum
Replies
Last Post
manfred@loma_wheels
991 Turbo
0
09-02-2015 12:22 PM
9254730277, area, bay, curb, financing, fixes, kwicksilversfcom, mateo, motorcycle, place, rash, repair, rims, san, wheel
